Battery bank calculator
How big a battery bank do you need, in kWh and amp-hours, and how many batteries is that? Enter what you use in a day and how long the bank has to carry you.
How the numbers work
- Energy for the backup period. Daily use times days of backup is the energy you will pull out of the bank before the sun returns.
- Usable percentage. You can't use every watt-hour on the label without shortening battery life. The battery maker's spec sheet states the rated depth of discharge; use that number. Lead-acid makers usually rate a much lower usable share than lithium (LiFePO4) makers.
- Inverter losses. AC loads go through the inverter, which wastes some energy as heat. Its efficiency is on its spec sheet. If you only run DC loads, set this to 100.
- Volts and amp-hours. Watt-hours = volts × amp-hours. Batteries in series add volts; strings in parallel add amp-hours.
The starting values (3 kWh a day, 2 days, 90% usable, 90% inverter efficiency) are examples to change, not recommendations.
Before you buy
- Check how many batteries the maker allows in series and in parallel. Many limit both.
- Cold reduces usable capacity and many lithium batteries can't charge below freezing unless they have built-in heaters. Check the spec sheet's temperature limits.
- Don't mix batteries of different ages, brands or chemistries in one bank.
- Fuse each string and have a licensed electrician check the design.
Comparing batteries? See our LiFePO4 battery guide, or size the whole system with the solar sizing calculator.